Whatsapp
Bridge-type stone cutting machine is a common cutting equipment in the stone industry, and plays an important role in stone production and processing. In order to ensure the normal operation of the equipment, extend its service life and improve production efficiency, we need to regularly maintain the bridge-type stone cutting machine. Introduce the safety maintenance, equipment cleaning, lubrication maintenance, etc. of the bridge-type stone cutting machine.
1. Safety maintenance
Bridge-type stone cutting machine is a dangerous equipment, and improper operation may cause serious injuries. Therefore, in daily use, we must pay attention to the safety maintenance of the equipment from the following aspects:
1. Ensure that the equipment is well grounded. During use, do not plug out the power supply of the equipment to avoid electric shock accidents;
2. Make sure there are no debris and personnel around the equipment;
3. Before use, check whether the insurance of the equipment is intact. When encountering an electrical fault, the power supply should be cut off in time;
4. The operator must have professional skills and strict operating procedures.
2. Equipment cleaning
The cleaning work of the bridge-type stone cutting machine is also very important. The equipment is in the stone cutting and processing environment for a long time, and is susceptible to sediment, dust and stone chips, which will not only affect the normal operation of the equipment, but also shorten the service life of the equipment. Therefore, the equipment needs to be cleaned regularly.
Equipment cleaning mainly includes the following aspects:
5. The outer surface of the equipment: After daily use, it should be wiped with a clean, soft cloth to clean the oil and dust on the surface of the equipment;
6. The workbench and transmission part: Use a brush and air gun to clean the workbench and transmission part;
7. Water nozzles, cutting blades, guards and other parts: After daily use, it is necessary to clean the debris and dirt of the relevant parts.
3. Lubrication and maintenance
Lubrication and maintenance of equipment is the key to extending the service life of equipment. The equipment works in a high-speed and heavy-load environment for a long time, and is prone to wear, fatigue, looseness and other problems, which affect the normal operation of the equipment. Therefore, during the daily use of the equipment, the equipment needs to be lubricated and maintained.
Lubrication and maintenance of equipment mainly include the following aspects:
1. Before the equipment is operated, the transmission parts of the equipment need to be lubricated. Such as cutting knife shafts, wheel shafts, guide wheels, gears, etc.
2. During the processing, add lubricating oil or grease in time according to the use of the equipment and the working environment. For example, motors, cylinders, travel wheels, etc.
